Premium Rechargeable Mini Speaker — Wireless Audio from MistAirHome Factory. Custom & Gift Options.
Customer Service Hotline:
+8613261677119
Premium Rechargeable Mini Speaker — Wireless Audio from MistAirHome Factory. Custom & Gift Options.+8613261677119
TL;DR - The Mistairhome WL-AH04D (STD) holds 260 mL and mists 41 mL per hour or 18.4 mL per hour, which is 6.3 hours and 14.1 hours per fill; the oil side takes 2.0 mL and runs 7.7 hours per fill at 0.26 mL per hour; it covers 15 sq m (158 sq ft) at a 2.6 m ceiling and measures 24.6 dB on the high step and 22.3 dB on the sleep step; it draws 2.2 W and takes its supply from USB-C 5V/0.5A; two drops on the cotton pad under the lid, which is the whole routine; the humidistat holds target band 40 to 70 percent in 5 percent steps, held within 4 percent over Bluetooth Low Energy to the phone, no router needed, and phone becomes the display for mist, light and the two to eight hour timer, no voice path on this chassis; 1200 mAh lithium polymer, giving 3.4 hours per charge on the low mist step; it weighs 232 g and measures 8.8 x 8.8 x 14.2 cm, and ships documented to CE / RoHS / FCC standards for import into United Kingdom. MOQ is 200 units per SKU with a 15-25-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Office Aroma Humidifier for Comfort category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH04D-STD:
| Misting method | Ultrasonic piezo micro-disc at 2.4 MHz with a capillary feed |
| Tank capacity | 260 mL |
| Mist output on the high step | 41 mL per hour |
| Mist output on the low step | 18.4 mL per hour |
| Run time per fill on the high step | 6.3 hours |
| Run time per fill on the low step | 14.1 hours |
| Coverage area | 15 sq m (158 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 24.6 dB |
| Noise at 1 m on the sleep step | 22.3 dB |
| Scent delivery method | Two drops on the cotton pad under the lid, which is the whole routine |
| Oil tray capacity | 2.0 mL |
| Oil contact parts | Cotton pad in a PP holder, replaced rather than washed |
| Scent intensity control | Two steps, and the scent is weak by design because the room is a metre away |
| Scent run time per tray fill | 7.7 hours |
| Oil use per hour | 0.26 mL per hour |
| Water type | Distilled recommended; a fine-pitch disc scales quickly on hard water |
| Mineral dust handling | Cartridge not fitted at this size; distilled water is the answer |
| Fill method | Screw base, filled at a sink, sealed for packing in a bag |
| Battery pack | 1200 mAh lithium polymer |
| Cordless run time | Up to 3.4 hours per charge on the low mist step |
| Charge time | 3.3 hours from empty |
| Power input | USB-C 5V/0.5A |
| Rated power on the high step | 2.2 W |
| Control interface | Single button with two steps, plus scent and light from the phone |
| Network link | Bluetooth Low Energy to the phone, no router needed |
| App platform | phone becomes the display for mist, light and the two to eight hour timer |
| Voice assistant support | no voice assistant at this size |
| Humidistat range and accuracy | target band 40 to 70 percent in 5 percent steps, held within 4 percent |
| Scheduling | Two to eight hour run timer with a daily repeat option |
| Night light | Flame-effect LED behind a frosted shell, switchable to a fixed warm tone |
| Protection | Dry-run shut-off, sealed cap with a silicone valve, cell overcharge cut-out |
| Dimensions | 8.8 x 8.8 x 14.2 cm |
| Weight | 232 g |
| Warranty | 12 months |
| Shipped kit | Standard build, 1 x USB-C cable, 1 x cleaning brush, 1 x oil pipette, instruction leaflet, retail box |
| Units per master carton | 100 |
| Lead time | 15-25 days |
Buyers in United Kingdom are not buying fragrance so much as buying a stop to a specific complaint: a dry throat in the morning, a room that smells shut, a child waking coughing, or a guest who mentions the air in a review. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Office Aroma Humidifier for Comfort category cluster around three causes: mineral dust on hard water, a scent that is stronger than the room wants, and a tray that cannot be cleaned. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves United Kingdom through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. For this configuration that means 18.4 mL per hour at 22.3 dB, holding 14.1 hours per fill and 7.7 hours of scent across a 15 sq m (158 sq ft) room.
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 18.4 mL per hour at 22.3 dB, holding 14.1 hours per fill and 7.7 hours of scent across a 15 sq m (158 sq ft) room.
Three deployment records from the Office Aroma Humidifier for Comfort programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A renovated shophouse with a ground-floor tea room and living quarters above, humid subtropical climate
Timing: Fourteen months from April 2025
The tea room is the constraint: it smells of tea and it is supposed to. The humidifier went into the living quarters upstairs, where the air conditioning dries the rooms, and it runs a very light scent that the owner described as 'something that does not fight the tea'. The practical note is a climate one - in a subtropical city the problem is a sealed, air-conditioned room rather than a dry season, and buyers there need a product sized for a bedroom, not for a house.
Deployment: A two-bedroom apartment in a 2010s block, reverse-cycle heating, four seasons in one day
Timing: One year from April 2025
Melbourne's reversals are the point: a room that needs moisture in the morning and none by the afternoon is a room for a target, not a step. The humidistat chassis went in with a 45 percent band and the app log showed the unit running roughly four hours a day rather than continuously. The buyer's own conclusion, which we have since quoted often, was that the log was the first thing that made the product feel like a controlled appliance.
Deployment: A lakeside hotel with 48 rooms, closed for six weeks each November for maintenance
Timing: Two seasons from May 2025
What decided this order was the shutdown. A programme that needs to be drained, dried and stored for six weeks and then set up again by a caretaker is a programme that gets abandoned in the second winter, so the specification included a written storage routine and a dry-out before the closure. It sounds trivial; it is the difference between a hotel reordering in year three and one that quietly stops. The hotel reordered in October 2026 with the same model code.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH04D (STD) packs 100 units to a carton, carries 12 months of warranty cover and a 15-25-day stated lead time, and draws 2.2 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC02-NURSERY | Rooms shared with a sleeping child, where light and smell both have to be quiet | An unscented night step and a light that switches fully off | The mist runs on the low step with the tray left empty, and the display and the ring both switch off, so the room is humidified without being scented or lit. |
| SC04-RECEPTION | Entrance desks and waiting areas judged in the first ten seconds | A consistent first impression that does not depend on who is on shift | A burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember. |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
| SC08-SHOPFLOOR | Retail floors where the scent is part of how the brand is remembered | One scent across the floor, present at the door and not at the till | Two output levels by zone, with the entrance pair on a higher scent step than the interior, because the dose that works at a doorway is too much ten metres in. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 18.4 mL per hour at 22.3 dB, holding 14.1 hours per fill and 7.7 hours of scent across a 15 sq m (158 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 18.4 mL per hour at 22.3 dB, holding 14.1 hours per fill and 7.7 hours of scent across a 15 sq m (158 sq ft) room.
Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.
RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH04D (STD) the figures worth carrying into the next order are the 260 mL tank, the 7.7 hours of scent per oil fill, and the 22.3 dB reading on the sleep step.
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 100 units at 0.140 cubic metres, which puts roughly 15,100 units in a 20 ft container and 33,300 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares and consumables ratio, which most first-time buyers set too low. One spare disc per twenty units, a cartridge per unit on hard water and a pad set per unit per year is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. Where oil ships in the box, the oil line is quoted separately because its transport classification is not the appliance's. The WL-AH04D (STD) packs 100 units to a carton, carries 12 months of warranty cover and a 15-25-day stated lead time, and draws 2.2 W on the high step.
What order size does Wanlin accept for a first aroma humidifier shipment?
200 units per SKU on standard builds, 300 where a custom colour or private-label packaging is involved, and several models may share one container provided each SKU clears its own minimum. For a buyer testing the category for the first time, a mixed container is the lower-risk route and is the one we recommend over a single-SKU container on an unproven model.
Is the scent too strong for a bedroom, and can it be switched off?
Scent is the most common cause of a unit being unplugged, so this range treats it as a setting rather than a feature. WL-AH04D offers two steps, and the scent is weak by design because the room is a metre away, and the tray can be left empty entirely, which is what most nurseries, shared offices and clinical rooms specify. A bedroom on the low step sits well under anything a neighbour would notice, and the light, flame-effect led behind a frosted shell, switchable to a fixed warm tone, switches fully off.
Will an ultrasonic aroma humidifier put mineral dust on dark furniture?
On hard water, yes, unless the build deals with it. The disc atomises the water and everything dissolved in it, and the minerals settle as a white film. For WL-AH04D-STD the answer built into the specification is cartridge not fitted at this size; distilled water is the answer. Where a buyer wants the question removed entirely, running on distilled water removes it without any cartridge.
What documentation comes with an aroma humidifier shipment for customs?
CE technical file, RoHS and REACH declarations, an EMC report and the IEC 60335-1 appliance safety report as standard, plus UN38.3, IEC 62133 and MSDS on any build carrying a cell, and FCC for the digitally controlled models going to North America. Where oil ships with the unit: an IFRA statement of conformity, an allergen declaration, an MSDS per blend and the flash point figure that decides transport classification. Every document names WL-AH04D rather than a family, which is what a customs officer checks.
Is private label available across the aroma humidifier range?
Across the whole range, including housing colour, logo, retail artwork, manual language, the accessory kit and the gift-box configuration. Most of it works inside existing tooling, so it does not add engineering time. What it does add is a decision about consumables, and we raise that early because the cartridge and pad choices affect the return rate more than any artwork decision does.
What is the cleaning routine, and how much staff time does it take?
Five to seven days in continuous use, or three to four where a scent runs daily, with a dry-out before any period of storage. The routine takes under two minutes on this chassis because the tank opening is wide enough for a hand and a brush, which is deliberate. A narrow-neck tank takes longer, gets cleaned less often, and eventually gets replaced - which is the real cost of a cheap moulding. Where a United Kingdom supply is hard the interval shortens rather than lengthens, and we would rather say that at quotation stage than have a buyer discover it from a complaint.
What happens if a unit fails inside the warranty period?
12 months on WL-AH04D against manufacturing defect. In practice most failures outside the warranty period are a worn disc, a scaled cartridge or a seal that has met the wrong oil rather than a faulty appliance, which is why we stock all three as separate lines and ship them with the units. A distributor who can supply the part keeps the customer.
What is the timeline from sample approval to a shipped container?
From approved sample to a shipped container, 15-25 days for first production plus the freight booking step, which is longer on battery builds because of the cell documentation and on any order carrying oil because of the transport classification. Sampling itself is 5 to 7 working days on an existing specification. We put the production figure on the proforma invoice so it is a commitment rather than an estimate.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 18.4 mL per hour at 22.3 dB, holding 14.1 hours per fill and 7.7 hours of scent across a 15 sq m (158 sq ft) room.
The cleanest first orders we see share one habit: the buyer declares the destination list and the oil list at quotation stage. Certificates, manuals, plugs and transport classification all follow from those two lists, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, oil use over a known number of hours, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units, a cartridge per unit where the water is hard and a pad set per unit per year costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-AH04D (STD) the figures worth carrying into the next order are the 260 mL tank, the 7.7 hours of scent per oil fill, and the 22.3 dB reading on the sleep step.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH04D (STD) packs 100 units to a carton, carries 12 months of warranty cover and a 15-25-day stated lead time, and draws 2.2 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
